Fort Myers - Cape Coral - Bonita Springs - Naples - Estero

A properly functioning cooktop is essential for preparing meals efficiently. But what happens when your burners won’t ignite, heat unevenly, or stop working completely? Whether you have a gas, electric, or induction cooktop, common issues can often be diagnosed and fixed quickly.

If your cooktop isn’t working in Fort Myers, Cape Coral, Bonita Springs, Naples, or Estero, Sunny Fix is here to help! In this guide, we’ll go over the most common cooktop problems, their causes, and how to fix them.

1. Gas Burners Won’t Ignite
Why It Happens:
If your gas cooktop burners aren’t igniting, the issue is often a clogged burner, faulty igniter, or disrupted gas supply.

Signs of the Issue:
You hear the igniter clicking, but the burner won’t light
No clicking sound when turning the burner knob
A weak or irregular flame
How to Fix It:
✅ Check the Gas Supply – Make sure the gas valve is fully open.
✅ Clean the Burner Ports – Food debris can block the gas flow. Use a soft brush or needle to clear any obstructions.
✅ Inspect the Igniter – If the igniter is dirty or worn out, clean it with a dry toothbrush or replace it.

When to Call a Pro:
If your burners still won’t ignite, you may have a faulty gas valve, igniter, or control module. Sunny Fix provides expert gas cooktop repairs in Fort Myers, Cape Coral, Bonita Springs, Naples, and Estero.

2. Electric Burners Won’t Heat Up
Why It Happens:
If your electric cooktop burners won’t heat, the issue may be with the power supply, burner element, or control switch.

Signs of the Issue:
The burner is completely cold after turning it on
Only some burners work while others don’t
The burner heats unevenly or intermittently
How to Fix It:
✅ Check the Power Connection – If your cooktop is hardwired, verify the circuit breaker hasn’t tripped.
✅ Test Other Burners – If only one burner doesn’t work, the issue may be with the element itself.
✅ Inspect the Burner Element – Look for cracks, burn marks, or loose connections.

When to Call a Pro:
If replacing the burner doesn’t fix the issue, the problem may be with the infinite switch or wiring. Sunny Fix offers fast electric cooktop repairs in Fort Myers, Cape Coral, Bonita Springs, Naples, and Estero.

3. Cooktop Surface Gets Too Hot or Not Hot Enough
Why It Happens:
If your cooktop is overheating or struggling to reach the right temperature, it could be due to a faulty thermostat, sensor, or control switch.

Signs of the Issue:
The burner gets hotter than expected, even on low settings
The temperature is inconsistent or fluctuates during cooking
The burner doesn’t reach maximum heat
How to Fix It:
✅ Use the Correct Cookware – Some cooktops require compatible cookware for even heating.
✅ Check the Knobs & Controls – A loose or misaligned knob can cause incorrect heating.
✅ Reset the Cooktop – Unplug the unit for 5 minutes and restart it to clear electronic malfunctions.

When to Call a Pro:
If temperature issues continue after troubleshooting, there may be a faulty sensor, relay, or control board. Sunny Fix provides cooktop diagnostics and repairs in Fort Myers, Cape Coral, Bonita Springs, Naples, and Estero.

4. Induction Cooktop Won’t Detect Cookware
Why It Happens:
Induction cooktops use electromagnetic fields to heat cookware. If your cooktop isn’t detecting pots and pans, the issue could be incompatible cookware, a faulty sensor, or electronic failure.

Signs of the Issue:
The cooktop won’t turn on or heat up
An error message appears on the display
The burner works intermittently
How to Fix It:
✅ Use Induction-Compatible Cookware – Only magnetic cookware works on induction cooktops.
✅ Ensure the Cookware Is Centered – Pans must sit flat and fully cover the burner area.
✅ Reset the Cooktop – Turn the cooktop off and back on to clear minor glitches.

When to Call a Pro:
If your induction cooktop still won’t detect cookware, the problem may be with the sensor or control board. Sunny Fix offers induction cooktop repairs in Fort Myers, Cape Coral, Bonita Springs, Naples, and Estero.

5. Cooktop Knobs or Touch Controls Not Responding
Why It Happens:
If the knobs or touch controls aren’t responding, there may be an electrical issue, control panel failure, or debris blocking sensors.

Signs of the Issue:
Touch buttons don’t respond or work intermittently
The cooktop turns on/off randomly
The knobs feel loose or stuck
How to Fix It:
✅ Clean the Control Panel – Dirt, grease, or moisture can interfere with touch sensors. Wipe the panel with a soft, dry cloth.
✅ Check the Lock Function – Some cooktops have a child lock feature that disables controls.
✅ Inspect for Loose Wiring – If knobs feel loose or unresponsive, they may need tightening or replacement.

When to Call a Pro:
If your cooktop still won’t respond, there may be an internal wiring or control board issue. Sunny Fix provides cooktop control panel repairs in Fort Myers, Cape Coral, Bonita Springs, Naples, and Estero.

Why Choose Sunny Fix for Cooktop Repairs?
A broken cooktop can disrupt your daily routine and make meal prep frustrating. At Sunny Fix, we specialize in fast, affordable, and expert cooktop repairs in Fort Myers, Cape Coral, Bonita Springs, Naples, and Estero.

✔️ Certified Technicians – We repair gas, electric, and induction cooktops of all brands.
✔️ Same-Day Service Available – Quick response to get your cooktop working ASAP.
✔️ Affordable Pricing & Warranty – No hidden fees—just transparent service with a guarantee.
✔️ Guaranteed Repairs – Our work is backed by a warranty for long-term reliability.

💡 Don’t let a faulty cooktop ruin your cooking experience! Call Sunny Fix today for professional cooktop repair services in Fort Myers, Cape Coral, Bonita Springs, Naples, and Estero. Let us restore your cooktop’s functionality fast!